sellernsa.blogg.se - Panasonic ip setting software

Panasonic WV-S6131 captures the highest quality images automatically even in very challenging and fast-changing surveillance environments. Panasonic WVS6131 Full-HD Pan/Tilt/Zoom Dome Network Camera Corridor mode (90ĭegrees or 270 degrees in image rotation). Super Dynamic 102dB.Ĭolor night vision (0.019 to 0.3 lx). Panasonic WVU1142 4-Megapixel iA (Intelligent Auto) IP CameraĤ-megapixel images up to 30fps. Corridor mode (90 degrees or 270 degrees in image 2.5x built-in motorized zoom and motorized focus lens. WVU2532L Full HD Varifocal Lens Outdoor Dome Network Cameraįull HD 1080p 30fps. You have no items in your Quotation list.

Explosion Protected Positioning Systems.

Samsung / Hanwha Thermal Imaging Cameras.

Network Video Servers/Encoders/Decoders.

Videotec Uslisse/Explosion Proof Systems.

Fujinon CCTV Fixed / Manual Iris Lenses.Panasonic Digital Video Recorders (DVR).Panasonic Network Video Recorders (NVR).When a firewall (including software) has been introduced, enable access to all the UDP ports.In this case, repeat the steps to set the settings. If the AC Adaptor or LAN cable is disconnected before the settings are completed, the settings will be canceled. Do not set, for example, DHCP because it is not supported.Īfter the button is clicked, it takes about 2 minutes for the settings in the unit to be completed.

The connection mode of the unit supports only. When the button is clicked, the Live screen of the selected camera is displayed.Ĥ.Input the network items, and click the button. If the same IP address is used for any additional cameras, the numbers of the additional cameras will be displayed in the column of the cameras concerned. ģ.Click the MAC address/IPv4 address of the camera to be set, and click the button.

It is not possible to display the unit or set its settings using an older version of Easy IP Setup Software (Ver.4.25 or earlier).

Easy IP Setup Software cannot be used from a different subnet via a router.

Do not set network settings from a multiple number of Easy IP Setup Software programs at the same time for a single camera.

Set the IP address in such a way that it does not duplicate an existing IP address.

If, after the network settings have been set, another device on the same network has the same IP address, the network operations will not be performed properly.

If the settings cannot be set using Easy IP Setup Software, set the settings for the unit and personal computer individually in > of the CCU menu. To set the settings for a multiple number of units, the settings must be selected for each camera involved. The settings related to the unit’s network can be set using the supplied Easy IP Setup Software. Using Easy IP Setup Software to set the unit’s settings